Prototype
to 50,000 Units
Without Switching
Vendors
IDMockup bridges the gap between your last prototype and your first production run — managing rapid tooling, injection molding, die casting, and electronic manufacturing services across Singapore, Taiwan, Japan, Thailand, Europe, and US under one engineering roof.
Every volume tier.
One supplier. No re-qualification.
Most OEMs lose 4–8 weeks re-qualifying a new supplier every time volume jumps a tier. IDMockup is purpose-built to take you from 5-piece validation samples to 50,000-unit production runs — on the same quote, the same NDA, the same engineering team.
PU or silicone replication from CNC master. Shore A/D tuned to match production material. Ideal for pre-production engineering validation, user testing, and investor demos.
Reaction injection molding for LARGE-format housing, automotive panels, and medical enclosures. Bridge tooling investment before hard-mold commitment.
P20 or aluminium tool injection molding. Full production-grade part geometry, gate, runner, and ejector system. ABS, PC, PP, PA66, and engineering polymers. DFM verified before tool cut.
H13 / NAK80 hardened steel tooling with hot-runner systems, side actions, lifters, and multi-cavity layouts. Consistent cycle times, tight dimension control, automated QC sampling.
AL380 / ADC12 aluminum and zinc die casting for structural chassis, heatsinks, and enclosures. Cold-chamber and hot-chamber processes. T5/T6 heat treatment, CNC post-machining, and CMF finishing.
Six production routes.
All under one roof.
SOFT TOOLING
MOQ 5 PCS
PU or silicone replication from CNC master. Shore A/D tuned to match production material. Ideal for pre-production engineering validation, user testing, and investor demos.
RIM · LOW-PRESSURE INJECTION
MOQ 50 PCS
LARGE-format parts without the capital cost of hard tooling. Polyurethane two-part system injected under low pressure. Ideal for instrument panels, server bezels, medical housings, and industrial enclosures up to 1,500 × 800mm. Shore D 50–80 available.
INJECTION MOLDING
MOQ 1K PCS
Rapid soft-tool (P20 / Al) for 1K–20K shots. Hard-tool (H13 steel, NAK80 steel, multi-cavity, hot-runner) for 100K+ shots. ABS, PC, PP, HDPE, PA66, POM, PEEK, and glass-filled engineering grades. Insert molding and two-shot overmolding (double injection) available.
ALUMINUM DIE CASTING
MOQ 10K PCS
AL380, ADC12, AL6061 cold-chamber die casting for heatsinks, motor housings, EV battery enclosures, and telecom chassis. T5/T6 heat treatment, CNC post-machining, anodize, powder coat, or e-coat finishing. Tolerance ±0.2mm on die cast features.
ZINC DIE CASTING
MOQ 10K PCS
ZA8, ZA12, and ZL4 zinc alloys for connectors, lock bodies, miniature brackets, and decorative hardware. Hot-chamber process for thin walls down to 0.8mm and complex draft-free profiles. PVD, chrome plate, and powder coat finishing. 10K pcs MOQ.
CMF FINISHING
ALL VOLUMES
Production-grade surface finishing applied in-house: hard anodize (Type II / III), powder coat, PVD, electroless nickel, e-coat, silk-screen, pad print, laser engrave, IML, soft-touch overmold, and metal overmold. Pantone / RAL colour match to tolerance.
From mold to finished product
Production Specifications Matrix
Before you send an RFQ, verify your volume, tolerance, and lead time requirements against our standard production capability. Every cell is a commitment, not a brochure estimate.
EMS for Singapore,
Taiwan, Japan, Thailand & Worldwide
IDMockup’s electronic manufacturing services span the full supply chain — from enclosure injection molding and die casting to in-house CMF finishing — allowing OEM clients in Singapore, Taiwan, Japan, and Thailand to consolidate mechanical and surface work under a single BOM.
Electronic device enclosures, PCB housing injection molding, connector brackets, die-cast heatsinks. NDA-protected manufacturing with IP-sealed delivery. Same-language engineering support. DHL express delivery 3–5 days to SG.
Full OEM manufacturing partner for Taiwanese electronics brands. Domestic supply chain consolidation — CNC, molding, die casting, CMF, and CMM inspection on a single PO.
Electronic device enclosures, DUV / EUV photomasks, FOUP / FOSB. NDA-protected manufacturing with IP-sealed delivery. Japanese-standard quality documentation: complete dimensional reports, material certificates, and traceability.
IDMockup’s Thailand facility supports ASEAN supply chain relocation. Molding and CMF services for Thai OEM partners. Competitive lead times for ASEAN-wide distribution projects.
Trusted OEM production partner for global electronics & industrial brands
Your BOM is 3 clicks from a production quote
Upload your CAD files, BOM, and target volume. Our production engineering team reviews material selection, tooling route, DFM red flags, and cycle-time economics — then returns a fixed quote within 24 hours. NDA signed before file review if required.
// Supported file formats: STEP · IGES · DXF · PDF · SolidWorks · CATIA · NX
IDMockup delivers integrated mass production solutions for OEM electronics, automotive, medical device, and industrial brands across Singapore, Taiwan, Japan, and Thailand. For clients seeking injection molding Singapore and die casting Singapore, IDMockup provides the complete production stack: vacuum casting for 5–50 piece validation samples, RIM bridge production for 50–500 pieces, rapid soft-tool injection molding for 500–5,000 pieces, H13 hard-tool injection molding for 5,000–50,000+ pieces, aluminum die casting (AL380 / ADC12) and zinc die casting (ZA8) for 1,000–500,000+ piece structural and decorative components, and investment casting for near-net-shape complex geometries. As a full-service provider of electronic manufacturing services Singapore, electronic manufacturing services Taiwan, electronic manufacturing services Japan, and electronic manufacturing services Thailand, IDMockup consolidates enclosure injection molding, die-cast heatsinks, CMF surface treatment, and CMM quality inspection under a single purchase order — eliminating the vendor hand-off delays that typically cost OEMs 4–8 weeks per production tier. From 50-piece bridge production to 500,000-piece high-volume die casting, IDMockup is the single-source contract manufacturing and OEM manufacturer Singapore partner that scales with your product lifecycle.