Mass Production Solutions | Injection Molding Singapore | Die Casting | Electronic Manufacturing Services | IDMockup
Mass Production Solutions
Production-Ready
Prototype to 50,000 Units Without Switching Vendors
IDMockup bridges the gap between your last prototype and your first production run — managing rapid tooling, injection molding, die casting, and electronic manufacturing services across Singapore, Taiwan, Japan, Thailand, Europe, and US under one engineering roof.
Every volume tier. One supplier. No re-qualification.
Most OEMs lose 4–8 weeks re-qualifying a new supplier every time volume jumps a tier. IDMockup is purpose-built to take you from 5-piece validation samples to 50,000-unit production runs — on the same quote, the same NDA, the same engineering team.
// Tier 01
5–500
Vacuum Casting (PU Casting)
Validation Samples
PU or silicone replication from CNC master. Shore A/D tuned to match production material. Ideal for pre-production engineering validation, user testing, and investor demos.
7–10 days~50 colors
// Tier 02
50–5K
RIM Low-Pressure Injection
Bridge Production
Reaction injection molding for LARGE-format housing, automotive panels, and medical enclosures. Bridge tooling investment before hard-mold commitment.
4–6 weeksLow tooling cost
// Tier 03
1K–20K
Rapid Tooling
Short-Run Production
P20 or aluminium tool injection molding. Full production-grade part geometry, gate, runner, and ejector system. ABS, PC, PP, PA66, and engineering polymers. DFM verified before tool cut.
4–7 weeks toolingP20 / Al tool
// Tier 04
5K–200K
Hard Tool Injection
High-Volume Production
H13 / NAK80 hardened steel tooling with hot-runner systems, side actions, lifters, and multi-cavity layouts. Consistent cycle times, tight dimension control, automated QC sampling.
6–10 wks toolingH13 / NAK80 steel
// Tier 05
100K+
Die Casting & Hard Mold
High-Volume Production
AL380 / ADC12 aluminum and zinc die casting for structural chassis, heatsinks, and enclosures. Cold-chamber and hot-chamber processes. T5/T6 heat treatment, CNC post-machining, and CMF finishing.
±0.2mm die castT5/T6 HT
Manufacturing Processes
Six production routes. All under one roof.
SOFT TOOLINGMOQ 5 PCS
// PROCESS 01
PU Casting (Vaccum Casting)
PU or silicone replication from CNC master. Shore A/D tuned to match production material. Ideal for pre-production engineering validation, user testing, and investor demos.
LARGE-format parts without the capital cost of hard tooling. Polyurethane two-part system injected under low pressure. Ideal for instrument panels, server bezels, medical housings, and industrial enclosures up to 1,500 × 800mm. Shore D 50–80 available.
50–5K pcs4–6 weeksUp to 1500mm
INJECTION MOLDINGMOQ 1K PCS
// PROCESS 03
Plastic Injection Molding & Rapid Tooling
Rapid soft-tool (P20 / Al) for 1K–20K shots. Hard-tool (H13 steel, NAK80 steel, multi-cavity, hot-runner) for 100K+ shots. ABS, PC, PP, HDPE, PA66, POM, PEEK, and glass-filled engineering grades. Insert molding and two-shot overmolding (double injection) available.
1K–200K pcsH13 / NAK80 hard toolInsert / Overmold
ALUMINUM DIE CASTINGMOQ 10K PCS
// PROCESS 04
Aluminum Die Casting
AL380, ADC12, AL6061 cold-chamber die casting for heatsinks, motor housings, EV battery enclosures, and telecom chassis. T5/T6 heat treatment, CNC post-machining, anodize, powder coat, or e-coat finishing. Tolerance ±0.2mm on die cast features.
10K–100K+ pcs±0.2mmT5/T6 HT
ZINC DIE CASTINGMOQ 10K PCS
// PROCESS 05
Zinc Die Casting
ZA8, ZA12, and ZL4 zinc alloys for connectors, lock bodies, miniature brackets, and decorative hardware. Hot-chamber process for thin walls down to 0.8mm and complex draft-free profiles. PVD, chrome plate, and powder coat finishing. 10K pcs MOQ.
10K–100K+ pcs0.8mm wallPVD / Chrome
CMF FINISHINGALL VOLUMES
// PROCESS 06
CMF Surface Treatment
Production-grade surface finishing applied in-house: hard anodize (Type II / III), powder coat, PVD, electroless nickel, e-coat, silk-screen, pad print, laser engrave, IML, soft-touch overmold, and metal overmold. Pantone / RAL colour match to tolerance.
Before you send an RFQ, verify your volume, tolerance, and lead time requirements against our standard production capability. Every cell is a commitment, not a brochure estimate.
RIM (Low Pressure)50–5K pcs4–6 wks±0.5mm3.0mmPU Shore D50–80
Rapid Tooling Injection1K–20K pcs4–7 wks±0.1mm1.2mmABS · PC · PP · PA
Injection Molding1K–100K+ pcs6–10 wks±0.05mm0.8mmFull engineering range
Aluminum Die Casting10K–100K+ pcs4–10 wks±0.2mm2.0mmAL380 · ADC12 · AL6061
Zinc Die Casting10K–100K+ pcs4–10 wks±0.1mm0.8mmZA8 · ZA12 · ZL4
Electronic Manufacturing Services
EMS for Singapore, Taiwan, Japan, Thailand & Worldwide
IDMockup’s electronic manufacturing services span the full supply chain — from enclosure injection molding and die casting to in-house CMF finishing — allowing OEM clients in Singapore, Taiwan, Japan, and Thailand to consolidate mechanical and surface work under a single BOM.
🇸🇬
Singapore EMS
Electronic device enclosures, PCB housing injection molding, connector brackets, die-cast heatsinks. NDA-protected manufacturing with IP-sealed delivery. Same-language engineering support. DHL express delivery 3–5 days to SG.
Taiwan OEM
Full OEM manufacturing partner for Taiwanese electronics brands. Domestic supply chain consolidation — CNC, molding, die casting, CMF, and CMM inspection on a single PO.
🇯🇵
Japan Electronic Manufacturing
Electronic device enclosures, DUV / EUV photomasks, FOUP / FOSB. NDA-protected manufacturing with IP-sealed delivery. Japanese-standard quality documentation: complete dimensional reports, material certificates, and traceability.
🇹🇭
Thailand Production
IDMockup’s Thailand facility supports ASEAN supply chain relocation. Molding and CMF services for Thai OEM partners. Competitive lead times for ASEAN-wide distribution projects.
Trusted OEM production partner for global electronics & industrial brands
Ready to Scale
Your BOM is 3 clicks from a production quote
Upload your CAD files, BOM, and target volume. Our production engineering team reviews material selection, tooling route, DFM red flags, and cycle-time economics — then returns a fixed quote within 24 hours. NDA signed before file review if required.
Mass Production Solutions · Injection Molding Singapore · Die Casting · Electronic Manufacturing Services — IDMockup
IDMockup delivers integrated mass production solutions for OEM electronics, automotive, medical device, and industrial brands across Singapore, Taiwan, Japan, and Thailand. For clients seeking injection molding Singapore and die casting Singapore, IDMockup provides the complete production stack: vacuum casting for 5–50 piece validation samples, RIM bridge production for 50–500 pieces, rapid soft-tool injection molding for 500–5,000 pieces, H13 hard-tool injection molding for 5,000–50,000+ pieces, aluminum die casting (AL380 / ADC12) and zinc die casting (ZA8) for 1,000–500,000+ piece structural and decorative components, and investment casting for near-net-shape complex geometries. As a full-service provider of electronic manufacturing services Singapore, electronic manufacturing services Taiwan, electronic manufacturing services Japan, and electronic manufacturing services Thailand, IDMockup consolidates enclosure injection molding, die-cast heatsinks, CMF surface treatment, and CMM quality inspection under a single purchase order — eliminating the vendor hand-off delays that typically cost OEMs 4–8 weeks per production tier. From 50-piece bridge production to 500,000-piece high-volume die casting, IDMockup is the single-source contract manufacturing and OEM manufacturer Singapore partner that scales with your product lifecycle.
Get your product into mass production – based on “expected production volume”, “product life cycle” and “budget”
At the critical stage of product development and market transition, mass production is not only about production speed, but also about cost control, quality consistency, and market responsiveness. Choosing the right process and production line planning based on each product’s expected production volume , lifecycle , and budget is crucial.
IDMockup combines its own factories and satellite production capacity to flexibly undertake small and medium-volume manufacturing to pilot production before formal mass production . Based on the customer’s product characteristics and needs, it provides corresponding process recommendations to help achieve stable quality within a reasonable cost.
We are committed to ensuring that every product can enter the market smoothly. Whether it is a short-term high-volume product or a long-selling product, we can find the most appropriate mass production rhythm and manufacturing strategy.
IDMockup allows your design to enter mass production and achieve the last mile of commercialization.
IDMockup product mass production features
☑️Strictly select manufacturing methods to ensure material durability and process stability : Based on product requirements and usage environment, we select the most appropriate processing technology and materials, taking into account mechanical performance, durability, and cost-effectiveness to ensure stable mass production quality.
☑️Precise tolerance control to improve assembly and structural accuracy : Strict tolerance control is performed on key dimensions and mating positions to reduce errors, improve consistency, and ensure smooth assembly and stable function.
☑️Multi -material mass production capabilities, both metal and plastic : Whether it is aluminum alloy, stainless steel, engineering plastics or transparent parts, we can provide corresponding process support to meet customers’ various product mass production needs.
If you’re concerned with reducing weight, maintaining heat dissipation, and maintaining rigidity in medium- to thick-walled structures, aluminum alloy die-casting offers the best balance of performance and cost-efficiency. If your product requires extreme aesthetics, thin-wall precision, and ultra-high-speed production, zinc alloy die-casting offers the optimal solution for both cost and aesthetics.
Low-pressure infusion is used to create large, lightweight, durable models that closely resemble the final product, with up to 3,000 replicas possible.
Our service process
At IDMockup, we offer unparalleled speed and efficiency for prototyping and production of consumer products. Our flexible, on-demand manufacturing approach allows us to quickly respond to changing consumer needs and deliver high-quality manufactured parts and products in a short timeframe. Our engineers and experts will provide optimal solutions and design modifications to ensure optimal results.
1. Inquiry
Provide appropriate quotations and working days based on the needs and 3D drawings, samples and other relevant information provided by the customer.
2. Modification
Production begins after receiving the order. Our professional team will discuss and modify the 3D drawings with the customer.
3. Production
Transfer the completed processing drawings to the CNC/3D printing machine for molding and monitor the production status
4. Assembly
The finished parts will be surface-modified to the customer-specified appearance, and then assembled into the finished product.
5. Delivery
Package the finished product properly and send it to the customer’s designated destination or deliver it to the customer within the delivery period.
CMF Options
Materials
We provide a wide range of materials, including metals, plastics, and composites.
Surface Finishings
We offer superior surface finishes that enhance part durability and aesthetics for applications requiring smooth or textured surfaces.
SOFT TOOLING
MOQ 5 PCS
RIM · LOW-PRESSURE INJECTION
MOQ 50 PCS
INJECTION MOLDING
MOQ 1K PCS
ALUMINUM DIE CASTING
MOQ 10K PCS
ZINC DIE CASTING
MOQ 10K PCS
CMF FINISHING
ALL VOLUMES
